There are a few things you must pay attention to when customizing the bathroom cabinet. If you are not careful, the entire bathroom cabinet may have to be redone. Let us discuss together what are the points worthy of your attention.
Bathroom faucets come in different heights, and not every faucet will fit your bathroom cabinet. The height of the faucet is mainly determined by the installation method of the basin. There are roughly two ways to install a washbasin. One is the under-mounted type. The sides of the under-mounted basin can be directly hidden under the stone surface or placed on the tabletop. In the case of a bottom-mounted faucet, it is recommended that you buy a short faucet, usually with a height between 80-150 cm. Another way to install a washbasin is a stone washbasin. The so-called stone washbasin means that the entire washbasin sits on the countertop stone, and the basin edge and basin body are visible. In this case, it is recommended that you buy a taller faucet. The height of the faucet is preferably between 300-350.
Distance between wall cabinet and tabletop
As mentioned before, faucets should not be bought randomly. After choosing the installation method of the basin, you must choose a faucet with a suitable height, then reserve enough space for opening and closing the faucet, and finally loosen it 1-2 inches before making a wall cabinet. The wall cabinet cannot be too close to the faucet, otherwise it will affect its use. Generally, for stone bottom basins, the height of the hollow between the wall cabinet and the stone surface is 200, while for stone basins, the height of the hollow is 350-400.
Don’t make the floor cabinet of the bathroom cabinet too high
In the case of a stone bottom basin, the height of the base cabinet of the bathroom cabinet should not be higher than 900. The actual height should be calculated based on the actual height of the user.
Pay attention to the location of the toilet
The location of the toilet will affect the design of the bathroom cabinets. Taking our case as an example, the toilet is right next to the bathroom floor cabinet. At this time, the bathroom floor cabinet should not be made into a drawer or a flat door in the position of the toilet, but can only be made into a sliding door. There are several places in front of the toilet that everyone must pay attention to when customizing the bathroom cabinet. If you are not careful, the entire bathroom cabinet may have to be redone. Let us discuss together what are the points worthy of your attention.
There should not be too little space on the left and right sides of the toilet
The space from left to right of the toilet should not be less than 600mm, otherwise it will be inconvenient to use the toilet. At the same time, consider the location where the toilet paper holder can be installed, which must be convenient and convenient.
The above five key points are actually only five of the hundreds that have been covered. There are many other key points that cannot be included all. If you want to customize a proper bathroom cabinet, you are welcome to contact our furniture sales department.